Stainless Steel
303S31; AISI 303; 1.4305
Free-cutting stainless steel. Non-magnetic. Good corrosion and chemical resistance.
Typical uses include machined parts, screws, studs, spindles, etc.
Supplied as:
Round bars: ( 1.59mm/0.0625ӯ to 152.4mm/6ӯ )
Hexagons: ( 4.76mm – 50.0mm or 3/16” – 1” )
304S11; AISI 304L; 1.4301/1.4307
Lower carbon content than 303.
Good corrosion and chemical resistance. More
suitable for welded parts.
Supplied as:
Round bars: ( 4.76mm/0.1875ӯ to 203.2mm/8ӯ )
Squares: ( 6mm-101.6mm or 0.375”-4” )
Flat bars: ( 40mm x 20mm to 100mm x 40mm )
Tubes: ( 32mmOD x 16mmID to 250mmOD x 200mmID )
316S11; AISI 316L; 1.4401/1.4404
Designed for use in severely corrosive conditions. Used in chemical industry
equipment, contact with water or marine atmosphere, food processing, etc. More
suitable for welding.
Supplied as:
Round bars: ( 6mmØ to 304.8mmØ or 0.25”Ø to 12”Ø )
Hexagons: ( 12.7mm/0.5” to 50.8mm/2” )
Tubes: ( 16mmID to 250mmOD x 200mmID )
316Ti; 1.4571
Titanium stabilized austenitic stainless steel. The grade is also well known
for its high ductility, particularly when considering cold forming.
Supplied as:
Round bars & flats.
416S21; AISI 416; 1.4005
This was the first free machining stainless steel. It is a heat treatable
chromium steel with excellent machinability and non-galling characteristics.
The alloy is magnetic in all conditions.
Supplied as:
Round bars.
420S21; AISI 410; 1.4006
This is the basic martensitic stainless which will attain high mechanical
properties after heat treatment. It has good impact strength, corrosion and
scaling resistance up to 1200 F (649 C).
Supplied as:
Round bars.
430F; AISI 430; 1.4104
This free cutting magnetic stainless steel is used in the food and chemical
industries for its corrosion and heat resistance properties.
Supplied as:
Round bars ( 3mmØ to 12mmØ ).
431S29; AISI 431; 1.4057; EN57
A hardened and tempered mecanite stainless steel.
Supplied as:
Round bars ( 12.7mm/0.5ӯ to 127mm/5ӯ ).
440C; AISI 440; 1.4125
A very high carbon content, high wear strength, moderate corrosion resistance
in mild environments.
Supplied as:
Round bars ( 4.76mm/0.1875ӯ to 127mm/5ӯ ).
17/4 PH; AISI 630/17-4; 1.4542/1.4548
Precipitation-hardening stainless steel. Offers a good balance between corrosion
resistance and strength. Magnetic. Hardenable to various strength levels and
hardness by varying the aging heat treat temperature.
Supplied as:
Round bars (6.35mmØ to 203.2mmØ)
Other grades and sizes available on request.